Storz S-PILOT - Closing the Application; Acoustic Signals; Availability Signal; Information Signal

Application
Instructions for use • S-PILOT
®
• PYB194_EN_V1.0_02-2021_IFU_CE-MDR 28
6.2 Closing the application
1. Remove the tube set from the product and dispose of it properly.
2. Disconnect the product from the power supply.
3. Run a wipe disinfection routine, see the processing instructions.
6.3 Acoustic signals
6.3.1
Availability signal
The availability signal sounds after the self-test when the product is switched on. The pitch of
the availability signal is modulated with a frequency of 1.5Hz by ± 2Hz each time. 5 different
harmonics are generated.
Harmonics of the availability signal
6.3.2
Information signal
The pitch of the information signal is modulated at a frequency of 1.5 Hz by ± 2 Hz at a time. 5
different harmonics are generated and the sound sequence occurs once. Signals indicating the
product's safety state are repeated and sound every 15s.
Information signal