STR Electronics Talon SRX - To Restore Default Calibration

217-8080
Talon SRX - User’s Guide
crosstheroadelectronics.com vexpro.com
Copyright 2017, Cross The Road Electronics, VEX Robotics Inc.
Updated: 2017-02-03
31
2.2.2. To Restore Default Calibration:
1) Remove power from the Talon SRX
2) Hold the B/C CAL button down
3) While holding down the button, restore power to the Talon SRX
4) Continue holding the button until the status LEDs blink green then release the button