Stratasys Objet500 - Page 121

Objet500 User Guide 5 Using Objet Studio
DOC-07027 Rev.E 5-88
4. ClickOK.
“Unknown”appearsintheprinter-namefield.
5. ClickOK.
6. Inthepop-upmessage,confirmthatyouwanttoworkinoff-linemodeby
clickingNo.
Figure5-109Off-linemessage
WhenObjetStudioisinoff-linemode,youcanconfigureitforpreparing
printjobsfordifferentprinters.
TochangetheObjetStudiooff-lineconfiguration:
1. IntheSet Printerdialogbox,selectaprintertype.
Figure5-110Off-lineprinterselection
2. ClickOK(not“Connect”).