Stratasys Objet500 - Printer Interface Color Key

Objet500 User Guide 6 Operating and Maintaining the Objet500 3DPrinter
DOC-07027 Rev.E 6-8
Printer
Interface
Color Key
Thebackgroundcolorsintheprinterindicatorfieldstellyouataglance
whetherornotthevalueoritemissuitableorreadyforprinting.
•Green—suitable/readyforprinting
Forexample,inFigure6-4onthepreviouspage:
❒ Heads (°C)—Theheadshavereachedthetemperaturerequiredfor
printingmodels.
❒ Ambient—Theambienttemperatureoftheprintingchamberiswithin
theacceptablerange.
❒ Heads Liquid—ThelevelofModelandSupportmaterialinthe
print-blockreservoirisOK.
❒ Heads Vacuum—Thevacuumlevelinthesystemiswithinthe
acceptablerange.
❒ Pre-Heater—TheModelandSupportresinsneedtobeheatedbefore
beingsuppliedtotheprintblock.Thetemperaturehasreachedthe
acceptablerange.
•Red—notsuitableforprinting(orindicatesawarning)
Forexample,inFigure6-4onthepreviouspage:
❒ Waste—Theweightofthewastecontaineris9000grams,morethan
allowedwhenbeginningaprintjob.("ReplacingtheWasteContainer"
onpage6-83.)
•Blue—notready
Forexample,inFigure6-4onthepreviouspage:
❒ UV lamps—TheUVlampsarenoton.
Thecolorofthematerialcartridgesdisplayedintheprinterinterfaceindicates
whichcartridgesareactiveforthecurrent(ornext)printjob.
•Blue—activecartridges
•Gray—reservecartridges