Strong LEAP-S3 - Installing Remote Batteries; Connection Guide

7
2.5Installing the batteries
Fig. 4
Open the cover on the remote control and insert 2x AAA batteries into the compartment. The correct position of batteries polar
diagram is shown inside the batteries compartment.
1. Open the cover.
2. Insert the batteries.
3. Close the lid.
WARNING: The batteries should not be recharged, disassembled, electrically short- circuited, be mixed or used
with other types of batteries.
3. CONNECTION GUIDE
Refer to the diagram below for connecting your Google TV Box to the HDMI input of TV.
NOTE: Before getting started, please turn o all devices to be connected.
Fig. 5
12V 1A