28
When you carry out a Premiere network
scan, your user lists of TV and radio channels
will not be affected. However, if you carry out
a full network scan, they may be affected,
depending on a setting you can make on the
Customise screen.
Press Menü to display the Main menu.
Highlight Configuration then press OK to
display the Configuration menu.
Highlight Customise then press OK to display
the Customise screen.
The item Scan resets user list, on this screen,
has a factory setting of Yes, which means that
a full network scan will reset your TV and radio
user lists to the pre-programmed versions.
If you would prefer the scan to leave your user
lists unchanged, press the or button to
change the setting to No and then press OK.
You can reset the channel list to remove all
non-Premiere channels (those with channel
numbers 200 or higher) from it.
Press Menü to display the Main menu.
Highlight Configuration then press OK to
display the Configuration menu.
Highlight Reset then press OK to display the
Reset screen.
Highlight Reset channels then press OK.
To confirm the deletion of the channels, press
the red button.
If you decide against resetting at any point,
press the Exit button.
EFFECT OF SCAN ON USER LISTS
RESETTING THE CHANNEL LISTS
SCANNING FOR CHANNELS
To Next Page
Loading...
