15
English
6. Operation
6.1
Getting Started
(When the DiSEqC Motor parameter is set as USALS <Figure 6.1.6>)
▪ Sat Degree: Satellite location.
▪ Antenna Position: Press OK.
▪ Goto Reference: Move the dish to the reference 0 position.
▪ Antenna Longitude: Your longitude at present.
▪ Antenna Latitude: Your latitude at present.
✽ Note: You need to know what LNB you are using to correctly set the L.O.
(local oscillator) frequency.
✽ Note: You need to understand how your receiver is connected to properly set the
22KHz and DiSEqC.
Figure 6.1.6 Figure 6.1.7
6. When you are done, press the EXIT button.
[2013.01.04]SRT4922A 매뉴얼_english_AUS.indd 15 2013-01-04 오후 4:49:46
To Next Page
Loading...
