36
6. Operation
6.4 Electronic Program Guide
➊
EPG
This submenu allows you to access the electronic program guide when available.
1. Press the GUIDE button to display the guide menu. <Figure 6.4.1>
2. Press to see the previous/next guide.
3. Press , , , to select another channel. <Figure 6.4.1>
4. Press OK to watch the selected channel and access its EPG data.
If you press OK in the right side of the screen (Event display list).
▪ If the current time EPG is selected, you will return to the previous menu and get signal from
the selected channel.
▪ If a future time (next) EPG is selected, the selected program will be reserved and the event
color will change.
5. You can select TV or Radio channels by pressing the TV/RADIO button
6. You can choose a channel list group by pressing the GROUP button.
7. You can access the timer menu by pressing the RED button. <Figure 6.4.2>
8. You can choose a EPG mode by INFO button
➋
Timer
This sub menu allows you to set the on/off time of your receiver.
1. This submenu allows you to set on/off times of your receiver. To display the timer menu,
press the RED button while in the guide menu. <Figure 6.4.2>
2. Press OK to select a timer’s parameter.
3. Press to change the parameter.
▪ Timer No: Select the timer that you want to modify. (1- 32 )
▪ State: Select the timer frequency. (off/once/daily/Mon~Fri/weekly)
▪ Date: Press OK to display a Calendar pop-up; Select a date
▪ Start Time: Input the time for your receiver power-on; use the NUMERIC buttons
▪ End Time: Input the time for your receiver power-off; use the NUMERIC buttons
▪ Channel: Press OK to display a Channel list pop-up; Select a channel
▪ File Name: Press OK and enter file name using keypad.
▪ Record: Set the record mode (ON/OFF)by using the left and right arrow button.
▪ Power Off: Select Power Off should you wish the receiver to turn to standby
after recording has finished.
[2013.01.04]SRT4922A 매뉴얼_english_AUS.indd 36 2013-01-04 오후 4:49:56
To Next Page
Loading...
