7
English
4. Controls/Functions
4.1 Front Panel
❶ Standby/Power on Indications Lamp: Flashes red light in ‘Standby’ mode and
shows no light in ‘Power ON’ mode.
❷ Power: Switches the receiver between ‘Standby’ and ‘Power ON’ modes.
❸ - ❹ CH. (▲/▼): To switch channels or change the cursor position on the
application screen.
❺ USB: To connect USB devices such as Memory stick or external Hard Disk Drive.
❻ Smart Card Reader: Insert smart card for encrypted channel access.
❶ ❸ ❹ ❻❷ ❺
[2013.01.04]SRT4922A 매뉴얼_english_AUS.indd 7 2013-01-04 오후 4:49:43
To Next Page
Loading...
Need help?
General
