56
6. Operation
6.9 DVR
➎
Timer Recording
This function is availabe when usb device is connected. You can choose a channel to record the
Program Guide menu by using . (Refer to 6.4 Electric Program Guide, 2)Timer)
✽ Timer Lead In and Lead Out Times
▪ Lead In and Lead Out Times can be set on your DVR to apply to all Timer recordings. Lead
In and Lead Out times add specified amounts of time to the beginning and the end of Timer
recordings so you don't miss the beginning or end of recorded programs.
▪ To set Lead In & Out times press MENU and select System Settings, then select Time Settings.
Then highlight Timer Lead Time and press OK the button. This will allow you to set the Lead In &
Out times to either 5,10 or 15minutes
➏
Time Shift
1. If you want to pause and resume live TV channel, press TIMESHIFT button.
The default time of Time-Shift is 60 min in your STB.<Fig 6.10.11>
2. If you want to resume live TV channel, press PLAY button. <Figure 6.9.12>
3. The trick-mode operations are provided. If you want to jump to live channel, please press
Figure 6.9.12Figure 6.9.11
[2013.01.04]SRT4922A 매뉴얼_english_AUS.indd 56 2013-01-04 오후 4:50:08
To Next Page
Loading...
