Strong SRT 4922B+ - Instant Recording

75
➌ Instant Recording
1. You can record a current channel by using
If you then press , a time-banner will be displayed. <Figure
6.9.9>
2. Press once more. The following picture shows that you can
select item when you
record a current channel. <Figure 6.9.10>
▪ Channel: It shows a current channel.
▪ Name: It shows a current recording name.
▪ Duration: You can change the duration of recording time
by
using the And current recorded time appear.
✽ Note: 1. Do not remove the USB device while recording a program.
Figure 6.9.9 Figure 6.9.10
➍ EPG (Electronic Program Guide) Recording
This method can be used if the program you wish to record is on within
the next 7 days.
▪
Press the button on your Strong remote.
▪
Use the or buttons to highlight the channel for the
program you wish to record. Press
OK
.
▪
Use the button to highlight the program name section of the
EPG menu.
▪
Use the or buttons to highlight the program you wish
to record.