76
▪
Press the button while this program is highlighted.
The selected program will then appear in red.
▪
Press the
EXIT
key to return to normal viewing.
This program will automatically be recorded by the STRONG DVR.
6.9 DVR
➎ Timer Recording
This function is available when usb device is connected. You can
choose a channel to record the
Program Guide menu by using .
(Refer to 6.4 Electric Program Guide,
2)Timer)
✽ Timer Lead In and Lead Out Times
▪ Lead In and Lead Out Times can be set on your DVR to apply to all Timer
recordings. Lead In and Lead Out times add specified amounts of time
to the beginning and the end of Timer recordings so you don't miss
the beginning or end of recorded programs.
▪ To set Lead In & Out times press MENU and select System Settings, then
select Time Settings. Then highlight Timer Lead Time and press OK
the button. This will allow you to set the Lead In & Out times
to either 5,10 or 15minutes
➏ Time Shift
1. If you want to pause and resume live TV channel, press TIMESHIFT
button. The default time of Time-Shift is 60 min in your STB.<Fig
6.10.11>
2. If you want to resume live TV channel, press PLAY button. <Figure
6.9.12>
3. The trick-mode operations are provided. If you want to jump to
live channel, please press
To Next Page
Loading...
