22
6.1 Getting Started
➌ Satellite Scan
Through this function, the receiver searches for all the
available channels and saves them in memory.
▣ Auto Scan <Figure 6.1.8>
1. Select the satellites you want to search by pressing the OK button
on the remote. You can select more satellites by pressing the
button and OK button on the remote.
▪ Search Type: Select the type of channel search you want by
pressing buttons on the remote.
▫ All: To search all the Free To Air and scrambled channels, TV & Radio channels.
▫ Free: To search Free To Air channels only.
▫ TV: To search TV channels only.
▪ Network Search: Select Network Search ON/OFF to find more transponders
through NIT Search.
▪ Scan: Begin channel search of the selected satellite.
2. Press OK under ‘SCAN’ to scan the
selected satellites. <Figure 6.1.9>
To Next Page
Loading...
