21
• Push Red (View) button and channels will be
displayed with signal and quality level %
• Push Yellow (Channel) button to highlight channel
section at top of banner.
• Use left and Right scroll buttons to change
channels. When % indicators are indicated, push
Red (View) button to list the channels.
• Push Exit 4 times to return to normal TV broadcast.
Checking your Aerial Signal
Adjusting aerial for optimum signal
There may be circumstances where signal strength
may not be adequate to receive consistent Digital
Reception. In this circumstance, re adjusting your
antenna may assist.
As you alter the position of your antenna, you will be
able to view the resultant signal strength change.
All of these connections and procedures completes
the Installation; however there are other connections
that can be made
To Next Page
Loading...
