Strong SRT 5000 - Basic Operations and Controls; Channel Selection and Navigation; Volume Control and Muting; Picture Pause and TV;Radio Modes

23
Pushing the RCL (Blue) Button on the remote control
returns you to the last channel that you were watching.
Quick Return to Last Channel
Watched (RCL Button)
Selecting and Changing Channels
There are 2 methods to select and change channels
• Press the required Numeric Button on the Remote
Control.
Please Note: SRT5000 has default
LCN – Logical Channel System
1 = Ten Network & Affiliates
2 = ABC
3 = SBS
7 = Seven Network & Affiliates
9 = Nine Network & Affiliates
• Select and change channels by using the Up/Down
channel buttons.
Volume Control
To adjust Volume UP and DOWN,
press the following buttons on the remote control:
Volume Increase: VOL Button +
Volume Decrease: VOL Button -
Important: The Volume Level is dependant on the
volume level that you firstly set within your TV I.e. via
your TV remote control volume setting.
Volume Mute
Press Mute button on the remote control
Press Mute button again to reactivate sound.
Picture Pause
To pause the picture, push Pause button on the
remote control.
TV or Radio Selection
To switch between TV and Radio, press the TV/RAD
Button.