Strong SRT 7010 - Time and Date Settings

20
7.4 Time and date settings
Press MENU and select Time. The menu provides options to adjust the time and date settings.
Press p/q to select an option and tu to adjust the setting. Press  to exit the menu.
Time Oset : Select Auto for automatic time and date updates from live signal or Manual
for entering them manually.
Time Zone: Select the Oset from GMT standard time.
Date: Enter the date when Time Oset is set to Manual.
Time: Enter the time when Time Oset is set to Manual.
Auto-Standby This feature is implemented for power saving. The receiver will turn to
Standby automatically if no command from the remote is received for the
selected time period. Default is 3 hours. It can also be turned O.NOTE: If
there are timers running, the auto standby function will be disabled for the
booked time.
Timer Enter to the timer (schedule) function. Please refer to section 7.4.2 for details.
Daylight Saving Time Select On or O depending on the year’s period.
7.4.1 Timer (Schedule)
In this menu you can setup the schedule for automatic switching to the dened channels at a
particular date/time. The timer menu can be entered directly from viewing mode by pressing the
BLUE button.
Add: Press RED to add a new booking. In the appearing dialog select channel type
and number, the starting date and time, end time, repeat cycle (once, daily or
weekly). Tip: For selecting the channel number you can use the tu.
When you have entered all parameters, press OK to store your booking.
Edit: Press the GREEN button to edit an existing booking.
Delete: Press the BLUE button to delete a booking from the list. Press OK to conrm
deleting or  to cancel.
NOTE You can set timers for programmes directly from the EPG. Please refer to
section 6.8 for more details.
7.5 Option
Press MENU and select Option. In this menu you can adjust the OSD Language, Subtitle Language,
Audio Language, Digital Audio mode.
Select an option and press tu to adjust the setting.
Press  to exit the menu.
OSD Language: Select the preferred language for the On Screen Display.
Subtitle Language: Select the preferred subtitle language.
Audio Language: Select the preferred audio language for watching TV channels. If the
language is not available, the default programme language will be used
Digital Audio: Select digital audio output mode. Settings aect both S/PDIF and HDMI
outputs.
PCM – audio from any format will be converted to PCM format
RAW – audio from receiver will be send in original format