Strong SRT 7030 - Page 28

Aspect Mode
You can set the display format to available settings Auto, 16:9, 4:3PS, (Pan&Scan) and 4:3LB (Letterbox)
Auto With Auto select the TV connected with HDMI will auto-negotiate the optimal
setting.
16:9 For 16:9 TV screens. All programmes will ll the full screen. Content formatted
in 4:3 will be stretched.
4:3 Letterbox 4:3LB (Letterbox)
For 4:3 TV screens. The unit will display all content in its original aspect ratio.
Programmes formatted in 16:9 will be presented with black bars on the top
and bottom.
4:3 Pan&Scan 4:3PS (Pan&Scan)
For 4:3 TV screens.16:9 content will have the extreme left and right portions
cut o and presented full screen.
Digital Audio Output Select digital audio output mode. Settings aect both S/PDIF and HDMI
outputs.
PCM – audio from any format will be converted to PCM Stereo format
RAW – audio from receiver will be send out in the original format
Using PCM mode is the best option if you do not have a TV or Digital Amplier that are not able to
process Multi audio.
7.3.6 Local Time Setting
Press MENU and select Local Time Setting The menu provides options to adjust the time and date
settings.
Press pq to select an option and tu to adjust the setting. Press  to exit the menu.
Region Select the region or country in which you live. This will set the time oset from
UTC automatically.
UTC Usage Select By Region (the Region selection is valid), User Dene (You may select
your UTC Oset yourself) or O (Time and Date setting are free to adapt.)
However, the default By Region setting and the correct Region setting are
usually sucient. In case the Daylight Saving Time should not be delivered by
the broadcaster, you can adapt it here.
UTC Oset : Select the correct Time Zone in which you live.
Summer Time You may adapt On or O for Daylight Saving Time, should it not be delivered
by the broadcaster.
Date: Enter the date when UTC Usage is set to O.
Time: Enter the time when UTC Usage is set to {O.
7.3.6.1 Timer Setting
In this menu you can setup the schedule for automatic switching to the dened channels at a particular
date/time.
Timers can be set directly from the EPG window or manually from this screen. Not set timers will be
default O
To enter a new timer manually, select an O marked timer in the list and press OK.
24