Timer Mode Select Once for a onetime event, select Daily for each day, same time event. A
free timer is default O.
Timer Service Select Channel to wake up the receiver to view the channel or Record for
recording the channel.
Wakeup Channel Select the channel for this event. Use tu or OK for a pull down list to select.
Wakeup Date Select the date for the event.
On Time Enter the time to start the event.
Duration Enter the length of the event.
After all settings have been made, select Save to store the settings. Select Cancel to discard the settings.
To edit an already existing timer entry, select the entry in the list and press OK, then select and edit the
item which you wish to change.
To delete an already existing timer entry, select the entry in the list and press OK, then select and set
Timer Mode to O and select Save to store.
Exit the screens with .
Parental Lock Set the age limit for a viewer if the viewer is underage. These only functions
if a broadcaster sends an age-signalling for the current programme. You can
only enter the Parental Lock menu by entering your password. The default
password 0000
Menu Lock Select either On or O. When On many menu items can only be accessed after
entering the password.
Channel Lock Set to O, channels selected as Lock in the Edit Channel menu, are all
accessible without entering the password. When selected On, these channels
are blocked and need the password to be entered.
New Password To change the default password from 0000 to another password like you
wish, select this option. Enter the new password.
Conrm Password Re-enter your new password to conrm.
Make a note o the new password.
OSD Setting OSD means On Screen Display, all the graphics you will see on screen.
OSD Timeout Set the time (in seconds) the program banner will be shown on screen, when
switching channels.
OSD Transparency Set the amount of transparency the OSD (banners and menu) will have,
superimposed on the running program. 40% is the most transparent option.
Favourite
Here you can rename the default names of the Favourite lists. For example: Movies or Music. Or even the
names of users of the unit with their own dedicated channels. Select the list name you want to edit and
press OK. Use the pop-up keyboard to change the name and select BLUE (OK) to conrm.
Audio Description setting
AD. For the visually impaired, a narrator can describe the actions happening on screen with a dedicated
additional audio track, mixed with the original audio track. This service is provided by some broadcasters
and is therefore subject to availability.
AD Service Select On if you wish to use the service by default on all channels which may
carry an AD track. `
Use AD as default Select On if you wish to use the service by default on all channels which may
carry an AD track.
25
English
To Next Page
Loading...
