2.0 YOUR RECEIVER
2.1 PIN code default: 0000
2.2 Front and side panel
Fig.1
1. LED display: Shows channel number in operation and time in Standby
2. Standby indicator:
Shows power state of the receiver: RED LED - receiver is in standby mode
3. IR Sensor: Receives commands from the remote control
4. Power button: Switch the receiver to Standby or On.
5. USB: For connection of USB device for Multimedia use
2.3 Rear panel
Fig.2
1. SAT IN To connect to the LNB of your satellite dish for reception of satellite broadcast
signal
2. HDMI To connect to the HDMI input of your TV using a good quality HDMI cable
3. TV SCART To connect to TV using a SCART cable
4. Audio L/R To connect to an analogue amplier for stereo audio
5. S/PDIF coaxial To connect to a digital or home cinema audio amplier
6. Power connector The receiver requires a wall adapter, mains voltage input 100~240V AC
50~60Hz 12V, 1.5A DC output. Please check the local power conditions before
connecting the receiver to the mains supply.
2.4 Remote Control
Fig.3
1. q Turns the receiver ON/Standby
2. ! To turn the sound on or o
3. 0-9 Channel number and numeric value input
4. TV/R Toggles between TV and radio mode
5. Same as MENU
6. FAV To access your favourite channels. Toggles between available favourite groups
7. 9 To switch between the last viewed channels
8. AUDIO Displays the audio selection menu with selections for available languages and
audio modes
9. INFO Press once to display channel number/name and current/coming
information. Press twice to display detailed event information. Press again to
view some technical details about the current channel.
10. EPG Viewing mode: Displays the EPG (Electronic Programme Guide)
11. pq Switches to the next/previous channel in viewing mode, Menu: moving the
highlight up/down Teletext: Page up or down.
12. OK Viewing mode: Displays the channel list. Menu: activation of the highlighted
item
13. tu Decreasing/increasing the volume level in viewing mode/navigating through
the menus/changing values of settings in a menu. Media player: make steps
in program banner. Teletext: Scroll through subpages.
5
English
To Next Page
Loading...
Need help?
General
