To Next PageTo Next PageWhy can't I record on my Strong TV Receiver anymore?
If recording is no longer possible with your Strong TV Receiver, the selected storage medium might be full. Delete existing recordings or attach and use another storage medium.
Why can't I access scrambled channels on my Strong SRT 82?
If you cannot access scrambled services on your Strong TV Receiver, it may be because the channel is scrambled and your receiver doesn't support scrambled channels. Select an alternative channel.
Video Decoder| profile level | HEVC (H265) |
|---|---|
| video resolution | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| decoding | PAL/NTSC |
Audio Decoder| audio support | Dolby Digital Plus*/AC3+/PCM |
|---|---|
| sampling rate | 32, 44.1, 48 KHz |
| audio mode | Stereo, Multi-Audio |
Tuner| input frequency range | 174 – 230 MHz (VHF) and 470 - 790 MHz (UHF) |
|---|---|
| input signal level | -20 ~ -82 dBm |
| antenna power | 5 V DC, max. 50 mA, short cut protected |
Memory and System| flash memory | 4 MB |
|---|---|
| SDRAM | 64 MB |
Connectors| ANT IN | SMA to IEC adapter (female) |
|---|---|
| Micro USB port | 5 V/500 mA (max.) supported |
| HDMI | Yes |
General Data| power consumption | 2.5 W (max) |
|---|---|
| operating temperature | 0 ~ +40° C |
| weight | 0.120 kg |
Read all instructions before operating. Use only specified attachments. Refer to product enclosure for information.
The default PIN code for the receiver is 1234. Use it for initial setup and security.
Details the ports on the side panel: TV (HDMI), Micro USB, IR extender, Antenna connection.
Connect antenna to RF IN connector using shielded cable and SMA to IEC adapter.
Connect TV using HDMI extender or directly to HDMI port. Ensure sufficient space and avoid tension.
Connect USB 2.0 HDD for recording/playback. Use Y-cable for power and receiver connection. Fast USB device needed.
Four ways to change channels: direct access (0-9), channel list, PG+/PG- keys, and directional keys.
Press INFO to get current channel and event information. Press twice for technical details.
Select audio streams or languages if available. Use AUDIO button and navigate with directional keys.
Access Teletext using TEXT button. Input page number or use coloured buttons and directional keys.
Programme Edit: Move, Skip, Lock, and Delete channels. Requires password (default 1234).
Troubleshooting for receiver not powering on. Check power cable, adapter, and main switch.
Troubleshooting for the external IR sensor. Check connection and electrical outlet.
