15
3) TIMESHIFT
The TIMESHIFT function allows you to pause the TV program being viewed. Once paused the tv
program is being stored on your connected USB Hard Drive or Flash Drive.
When watching a program, press the “TIMESHIFT” key on the remote control to activate the
function. You can now use the F.R. (Rewind function) to go back to the point you began the
TIMESHIFT function or F.F. (Fast Forward) to catch up to live viewing. If you wish to stop the
TIMESHIFT function, press the “STOP” key.
A dialogue box will be displayed on screen asking you to confirm. Press “OK” to stop the TIMESHIFT
and save the recorded section to your USB HDD, or Flash Drive. You can view this section later by
pressing the FILE LIST key. If you select EXIT the receiver will continue to TIMESHIFT the program.
If you press the “INFO” key, you can access the TIMESHIFT information screen.
WARNING:
For the compatibility of HDD and USB devices with TIMESHIFT and DVR function, please refer to the
table below:
TIMESHIFT PVR RECORD FORMAT
USB device
doesn’t work Works Fat32
3.5inch HDD
Works Works NTFS
2.5inch HDD
Works Works NTFS / FAT 32
1.8inch HDD
doesn’t work Works NTFS / FAT 32
Please make sure that you are NOT using an USB device or a 1.8inch HD for TIMESHIFT function.
To Next Page
Loading...
Need help?
General
