FFiigguurree 2255 –– BBaassee lluubbrriiccaattiioonn llooccaattiioonnss
4. Apply TTrrii--FFllooww™ to the right and left height adjustment racks (C) (Figure 26). Provide an even application.
5. Apply TTrrii--FFllooww™ to the right and left slide plates (D) (Figure 26). Provide an even application.
FFiigguurree 2266 –– HHeeiigghhtt aaddjjuussttmmeenntt rraacckkss aanndd ssiiddee ppllaatteess
6. Let the cot sit for five minutes.
7. Turn the cot back over. Raise and lower the cot a few times to work the lubricant throughout the applied areas.
8. Wipe any excess lubricant from the base tubes.
9. Verify proper operation before you return the cot to service.
6082-209-001 Rev AA.3 35 EN
To Next Page
Loading...
Need help?
General
