Black plate (109,1)
北米Model "A8160BE-B" EDITED: 2010/ 10/ 14
& Power window operation by
passengers
Each passenger window can be controlled
by the power window switch located on
the door.
To open:
Push the switch down and hold it until the
window reaches the desired position.
To close:
Pull the switch up and hold it until the
window reaches the desired position.
When the lock s witch on the power
window switch cluster, l ocated on the
driver ’s side door, is in the “LOCK”
position, the passengers’ windows cannot
be operated with the passengers’
switches.
& Initialization of power win-
dow (type A)
If the vehicle’s battery is disconnected due
to situations such as battery or fuse
replacement, the following functions are
deactivated.
. One-touch auto up/down function
. Anti-entrapment function
Initialize the power window using the
following procedure to reactivate these
functions.
1. Close the driver’s door.
2. Turn the ignition switch to the “ON”
position.
3. Open the driver’s side window halfway
by pushin g dow n the power win dow
switch.
4. Pull up the power window switch and
close the window completely. Continue
pulling up the switch for approximately 1
second after the window is closed com-
pletely.
Rear gate
The rear gate can be locked and unlocked
using any of the following systems.
. Power door locking switch: Refer to
“Power door locking switches” F2-6.
. Remote keyless entry system: Refer to
“Remote keyless entry system” F2-7.
To open:
Unlock the rear gate and push the rear
gate opener button to open the rear gate.
Keys and doors 2-23
– CONTINUED –
2
To Next Page
Loading...
