Subaru 2011 Forester - Connecting USB Storage Device; Ipod

Black plate (218,1)
北米Model "A8160BE-B" EDITED: 2010/ 10/ 14
5-34 Audio
Type D audio:
Model Firmware version
iPod
®
5G 1.3
classic 2.0.4
nano 1.3.1
nano 2G 1.1.3
nano 3G 1.1.3
nano 4G 1.0.4
touch 3.1.3
touch 2G 3.1.3
iPhone
®
1G 3.1.3
3G 3.1.3
3G S
3.1.3
CAUTION
Do not connect an iPod
®
other than
the previously stated models. Doing
so may result in a malfunction or,
depending on conditions, cause a
fire.
NOTE
. iPod
®
is a registered trademark of
Apple Inc.
. You are only permitted to personally
copy and play copyright-free material
or material that is legally permitted to
be copied and played by using an
iPod
®
and iTunes. Copyright infringe-
ment is prohibited by law.
. To check the firmware version of an
iPod
®
, connect it to a computer and
check the device manager. For further
information, see the User’s Guide that
comes with the iPod
®
. To update the firmware version of an
iPod
®
, visit the Apple Inc. website.
. Depending on the model and firm-
ware version of an iPod
®
, it may not
work properly or not operate at all.
& Connecting USB storage de-
vice / iPod
®
WARNING
Do not operate an iPod
®
while
driving; it may distract your atten-
tion from driving and can lead to an
accident.
CAUTION
. If the data stored in an iPod
®
is
deleted while it is connected to
the in-vehicle system, the data
cannot be recovered.
. Do not store an iPod
®
in the
vehicle. If an iPod
®
is left in the
vehicle for a long period of time,
it may be deformed, discolored
or damaged by high temperature.
NOTE
. Even if a USB storage device or
iPod
®
is connected, it cannot be played
unless the
button is pressed.
. A movie cannot be played while an
iPod
®
is connected.
. While an iPod
®
is connected, the
iPod
®
cannot be operated using the
click wheel on the iPod
®
(except some
models).
. When using an iPod
®
by connecting
it to in-vehicle equipment, the order of
the list items displayed on the in-
vehicle equipment may be di fferent
from that on the iPod
®
. However, this
does not indicate a malfunction.
. An iPod
®
battery that is connected
to in-vehicle equipment will be charged
when the ignition switch is in the “ON”
or “Acc” position. However, activation
of the iPod
®
may be delayed if the
battery charge of the iPod
®
is low.
. If an iPod
®
does not activate after
operation, disconnect the connection
cable from the iPod
®
and reset it. For
the resetting procedure, see the User’s