EasyManua.ls Logo

Subaru 2011 Forester - Recommended Grade and Viscosity; Rear Differential Gear Oil

Subaru 2011 Forester
446 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (379,1)
Model "A8160BE-B" EDITED: 2010/ 10/ 14
1) Upper level
2) Lower level
3. Pull out the level gauge again and
check the oil level on it. If it is below the
lower level, add oil to bring the level up to
the upper level.
CAUTION
Be careful not to spill front differ-
ential gear oil when adding it. If oil
touches the exhaust pipe, it may
cause a bad smell, smoke, and/or a
fire. If oil gets on the exhaust pipe,
be sure to wipe it off.
& Recommended grade and
viscosity
Each oil manufacturer has its own base
oils and additives. Never use different
brands together. For details, refer to
Manual tra nsmis sion, fro nt differen tial
and rear differential gear oil F12-8.
Rear differential gear oil
There is no rear differential gear oil level
gauge. To check the rear differential gear
oil level, consult your SUBARU dealer for
inspection.
& Recommended grade and
viscosity
Each oil manufacturer has its own base
oils and additives. Never use different
brands together. For details, refer to
Manual transmission, front differential
and rear differential gear oil F12-8.
Maintenance and service 11-23
11

Table of Contents

Other manuals for Subaru 2011 Forester

Related product manuals