Subaru 2011 Forester - Front Fog Light Switch (if Equipped); Illumination Brightness Control

Black plate (146,1)
北米Model "A8160BE-B" EDITED: 2010/ 10/ 14
3-32 Instruments and controls
Illumination brightness con-
trol
The brightness of clock display, audio, air
conditioner, information display and instru-
ment panel illumination dims when the
light sw itch is in the “
” or “ ”
positions. You can adjust brightness of
the instrument panel illumination for better
visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
When the control dial is turned fully
upward, the illuminatio n brightness
becomes the maximum and the auto-
matic dimming function does not work
at all.
Front fog light switch (if
equipped)
The front fog lights operate only when the
low beam headlights are illuminated.
However, the front fog lights turn off when
the headlights are switched to high beam.
To turn on the front fog lights, turn the front
fog light switch on the turn signal lever
upward to the “
” position. To turn off the
front fog lights, turn the switch back down
to the “OFF” position.