Black plate (212,1)
北米Model "A8160BE-B" EDITED: 2010/ 10/ 14
5-28 Audio
. Turn off the power of the audio
equipment
. Turn the ignition switch to the
“LOCK” position
& Display selection (type A, B
and C audio)
Type A and B audio
Type C audio
If you press the “TEXT” button during
playback, the display will change as
shown in the following sequence.
For CD-DA:
For MP3/WMA/AAC:
For iPod
®
:
! Page (track/folder title) scroll
If you press the “TEXT” button again for at
least 0.5 second, the title will be scrolled
so you can see all of it.
NOTE
. For type A and B audio, the display
is designed to show titles for up to 24
characters.
. For type C audio, the display is
designed to show titles as shown in
the following items.
– When playing a CD-DA: 256 char-
acters
– When playing an MP3/WMA/AAC:
64 characters
– WhenplayinganiPod
®
:255
characters
. If no operations are performed for 10
seconds, the screen that was displayed
before pressing the “TEXT” button for
more than 0.5 second will be shown.
& Folder selection
NOTE
. Selecting folders in this way is
possible only within a single disc.
. Only MP3/WMA/AAC folders are re-
cognized when an attempt to select the
next or previous folder is made. If no
appropriate folder exists on the disc,
pressing the “
” or “ ” side of the
“FOLDER/PTY/CAT” button starts play-
back beginning with the first track/file.
Press the following buttons briefly.
Type A and B audio:
To select the next
folder
To go back to the
previous folder
Type C audio:
To select the next
folder
To go back to the
previous folder
To Next Page
Loading...
