Subaru 2011 Forester - Page 234

Black plate (239,1)
北米Model "A8160BE-B" EDITED: 2010/ 10/ 14
voice tag.
3. Register the voice tag. For details,
refer to “ Preparation for using the Hands-
free system” F5-46.
! List phones function
The cell phone voice tags saved in the cell
phone list are spoken by using the list
phones function.
1. Select the “LIST PHONES” menu. If
no cell phones are registered, “EMPTY” is
displayed and the mode changes to the
“PHONE SETUP” mode.
2. Registered cell phones are displayed
on the saved side. While displayed, if the
“TUNE/TRACK/CH” dial is turned, the
next registered cell phone is displayed.
Press the ON hook button
to close the
Hands-free menu.
3. Select a cell phone by operating the
“TUNE/TRACK/CH” dial or pressing the
talk switch
. Then “SELECTED” is
displayed.
4. Select the following menus.
. “SELECT PHONE” to connect the
selected cell phone
. “CHANGE NAME” to change the voice
tag
. “DELETE” to delete the selected cell
phone from the list
. “GO BACK” to go back to the “PHONE
SETUP” mode
! Setting passkey
1. Select the “SET PASSKEY” menu.
After the currently set passkey is dis-
played, a new passkey can be entered.
2. Input the new passkey by operating
the “TUNE/TRACK/CH ” dial or saying the
passkey.
3. Select the “CONFIRM” menu. The new
passkey is displayed, the passkey is
changed and the mode changes to the
“PHONE SETUP” mode.
! Deleting registered cell phone from
the list
1. Select the “PHONE SETUP” menu.
2. Select the “DELETE ” menu.
3. Select a cell phone to be deleted by
operating the “TUNE/TRACK/CH” dial or
saying a voice tag.
4. Select the “CONFIRM” menu. “DE-
LETED” is displayed, the data is deleted
and the mode changes to the “PHONE
SETUP” mode.
! System setup
You can select the following menus only
by operating the “TUNE/TRACK/CH” dial.
! Setting guidance volume
To set the guidance volume, perform the
following procedure.
1. Select the “GUIDANCE VOL”/“GUI-
DANCE VOLUME” menu.
2. Set the guidance volume by operating
the “TUNE/TRACK/CH” dial.
! Initializing the registered data
To initialize the registered data, perform
the following procedure.
1. Select the “INITIALIZE” menu.
2. Select the “CONFIRM” menu. First
“PLEASE WAIT”, then “INITIALIZED” is
displayed. The registered data is initia-
lized and the mode changes to the last
mode.
! Selecting language
To select the language, perform the
following procedure.
1. Select the “SEL LANGUAGE”/“SE-
LECT LANGUAGE” menu.
2. Select the desired language by oper-
ating the “TUNE/TRACK/CH” dial.
Audio 5-55
5