3-30
Instruments and controls/Multi function display
NOTE
. The welcome screen will disappear
when the ignition switch is turned to
the “ON” position while the welcome
screen is displayed.
. If any of the doors (including the
rear gate) is opened while the welcome
screen is displayed, the door ajar
warning will appear.
. The welcome screen can be set to
on or off. For details, refer to “Bypass
screen setting” F3-55.
. For a certain period of time after the
welcome screen has once appeared, it
may not appear again even when the
driver’s door is opened again. This
does not indicate a malfunction.
& Ending screen
When the ignition switch is turned to the
“LOCK” (off) position, the “Goodbye”
screen will appear for several seconds.
& Self-check screen
When the ignition switch is turned to the
“ON” position, the vehicle self-check is
performed. The screens corresponding to
the following items will appear one after
another for several seconds each.
1) Windshield washer fluid: Checks the
level of windshield washer fluid.
2) Brake fluid: Checks the level of brake
fluid.
3) Engine oil: Checks the interval of engine
oil replacement.
4) Oil filter: Checks the interval of oil filter
replacement.
5) Tires: Checks the interval of tire rotation.
6) Inspection and maintenance: Checks the
interval of inspection and maintenance.
When the checks are performed, the color
of the icon corresponding to the checked
item will turn green.
To Next Page
Loading...
Need help?
General
