2. Operate the “ ” or “ ” switch to
select the “Languages” item. Then pull the
“
/SET” switch toward you.
3. The current language setting will be
displayed. Pull the “
/SET” switch toward
you to enter the language selection mode.
4. Select the preferred language by
operating the “
” or “ ” switch. Then
pull the “
/SET” switch toward you.
5. Select “Set” by operating the “ ”
switch, and confirm the setting by pulling
the “
/SET” switch toward you.
6. The system will notify you that the
setting is complete.
& Maintenance settings
The items in the maintenance settings can
be set. To change the items, operate the
“
” or “ ” switch toward you.
! Preparation for maintenance set-
tings
1. Turn the ignition switch to the “ON”
position.
2. Pull and hold the “
/SET” switch
toward you to show the selection screen.
Instruments and controls/Multi function display
3-57
– CONTINUED –
To Next Page