3-58
Instruments and controls/Multi function display
3. After the selection screen is displayed,
operate the “
” or “ ” switch to show the
“Maintenance” item. Then, pull the “
/
SET” switch toward you.
! Engine oil setting
1. Perform the preparation steps accord-
ing to “Preparation for maintenance set-
tings” F3-57.
2. Operate the “ ” or “ ” switch to
select the “Engine Oil” item. Then pull the
“
/SET” switch toward you.
3. Select the setting location (month, day,
year or distance) by operating the “
” or
“
” switch. Then pull the “ /SET” switch
toward you.
4. Select a number by operating the “ ”
or “
” switch. Then pull the “ /SET”
switch toward you.
If you also want to change the setting for
another location, repeat steps 3 and 4.
To Next Page