5-26
Audio/USB storage device / iPod
®
operations
The USB connector is located in the
center console. Use the connector to
connect a USB storage device/iPod
®
.
& How to play back
1. Connect a USB storage device/iPod
®
.
2. Press the
button. Each time you
briefly press the button, the mode will
change in the following sequence.
Type A audio:
*: Only when a Media Hub is connected.
Type B audio:
When the USB/iPod
®
mode is selected,
the player will start playback of the USB
storage device/iPod
®
.
NOTE
. Depending on the number of files
stored on the iPod
®
and the firmware
version, the iPod
®
may not activate
smoothly after operation or not work
properly.
. Do not disconnect th e co nnector
from the iPod
®
during iPod
®
operation.
& To select a track from the
beginning
Select a track in the same way as for a
CD. For details, refer to “To select a track
from the beginning” F5-17.
& To select a chapter from the
beginning when connecting
iPod
®
When playing podcasts or audiobooks,
select a chapter in the same way as for a
CD. For details, refer to “To select a track
from the beginning” F5-17.
& Fast-forwarding and rewind-
ing
Fast-forwarding and rewinding are oper-
ated in the same way as for a CD. For
details, refer to “Fast-forwarding and
rewinding” F5-17.
NOTE
When connecting iPod
®
:
. When the end of a track is reached
while fast-forwarding, fast-forwarding
ends and play begins from the begin-
ning of the next track.
. When the beginning of a track is
reached while rewinding, rewinding
ends and play begins from the begin-
ning of the track.
& Repeating
! When connecting USB storage de-
vice
Repeating is operated in the same way as
for a CD. For details, refer to “Repeating”
F5-18.
To Next Page
Loading...
