3-50
Instruments and controls/Multi function display
5. Select “Set” by operating t he “ ”
switch, and confirm the setting by pulling
the “
/SET” switch toward you.
6. The system will notify you that the
setting is complete.
& Screen settings
The items in the screen settings can be
set. To change the items, operate the “
”
or “
” switch, and then pull the “ /SET”
switch toward you.
! Preparation for screen settings
1. Turn the ignition switch to the “ON”
position.
2. Pull and hold th e “
/SET” switch
toward you to show the selection screen.
3. After the selection screen is displayed,
operate the “
” or “ ” switch to show the
“Screen Setting” item. Then, pull the “
/
SET” switch toward you.
! Top display setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-50.
2. Operate the “ ” or “ ” switch to
select the “Top Display” item. Then pull the
“
/SET” switch toward you.
3. Pull the “ /SET” switch once more.
To Next Page