4. Select an item by operating the “ ” or
“
” switch. Then pull the “ /SET” switch
toward you.
5. Select “Set” by operating the “ ”
switch, and confirm the setting by pulling
the “
/SET” switch toward you.
6. The system will notify you that the
setting is complete.
! Fuel consumption screen setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-50.
2. Operate the “ ” or “ ” switch to
select the “Cons” item. Then pull the “
/
SET” switch toward you.
3. Pull the “ /SET” switch once more.
Instruments and controls/Multi function display
3-51
– CONTINUED –
To Next Page