operating the “ ” switch.
4. Confirm the setting by pulling the “ /
SET” switch toward you.
5. The system will notify you that the
setting is complete.
& Driving history registration
The items in the driving history can be
registered. To change the items, operate
the “
” or “ ” switch, and then pull the
“
/SET” switch toward you.
1. Turn the ignition switch to the “ON”
position.
2. Pull and hold th e “
/SET” switch
toward you to show the selection screen.
3. After the selection screen is displayed,
operate the “
” or “ ” switch to show the
“Driving History” item. Then, pull the “
/
SET” switch toward you.
4. Pull the “ /SET” switch toward you
once more to enter the setting mode.
5. The system will notify you of the place
to be selected for approximately 2 sec-
onds.
Instruments and controls/Multi function display
3-61
– CONTINUED –
To Next Page