3-56
Instruments and controls/Multi function display
2. Operate the “ ” or “ ” switch to
select the “Bypass Screen” item. Then pull
the “
/SET” switch toward you.
3. Select the item to set by operating the
“
” or “ ” switch. Then pull the “ /SET”
switch toward you.
4. Select “On” or “Off” by operating the
“
” or “ ” switch. Then pull the “ /SET”
switch toward you.
If you want to change setting for another
item, repeat steps 3 and 4.
5. Select “Set” by operating the “ ” or
“
” switch, and confirm the setting by
pulling the “
/SET” switch toward you.
6. The system will notify you that the
setting is complete.
! Language setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-50.
To Next Page