- 48 -
DVD Player Operations
Discs
■ Types of Playable Discs
This receiver supports the NTSC or PAL color
television system; therefore, please use the
type of discs labeled “NTSC” or “PAL” on the
discs or packages. This receiver cannot play
discs that support a color television system
(SECAM, etc.) other than NTSC or PAL.
ATTENTION
The playback status may be determined in
response to the DVD or software creator's
intention. This receiver plays disc contents
intended by the software creator; therefore,
functions may not operate as you intend. Be
sure to read the user's guide that comes with
the disc to be played.
■ Region Code of Playable Disc
(region code), which is indicated on some
DVDs, represents areas they can be played in.
This receiver cannot play discs that do not have
“1” or “ALL” indicated on this mark. If you
attempt to play such a disc, the message “you
cannot play this disc.” will appear. Note also
that some discs may be subject to regional
restrictions, meaning that this receiver will not
play them, even though they list or state a
region code.
■ Mark Indicated on Disc
The following table shows the marks that are
indicated on DVDs or packages.
Type and
mark of
playable disc
Size/playing
side
Max. playing
time
12cm/1 side
1 layer
2 layers
<MPEG 2
system>
133 min.
242 min.
12cm/2 sides
1 layer
2 layers
<MPEG 2
system>
266 min.
484 min.
Mark Description
Indicates the number
of audio tracks.
Indicates the number
of subtitles.
Indicates the number
of angles.
Indicates the image
aspect ratio (ratio
between the height
and width of the TV
screen) able to be
selected.
• “16:9” indicates a
wide screen, and
“4:3” indicates a
standard screen.
Indicates by use of a
number regions where
the disc can be played.
• “ALL” indicates
that the disc can
be played
anywhere in the
world, and the
number indicates a
region code. “1” is
the region number
for North America.
Mark Description
To Next Page
Loading...
Need help?
General
