- 66 -
AUX Operations
Using the AUX
Switching the AUX Mode ON and OFF
CHECK
If the NAVIGATION screen is displayed, press
the [SCREEN AV/NAV] button to switch to the
AUDIO screen.
(1) Hold down the [SRC] button for 1 or
more seconds.
Audio mode will be turned OFF.
(2) Hold down the [CTRL] button for 1 or
more seconds.
(3) Touch that appears on
the PND display.
Checked: AUX setting ON
Not checked: AUX setting OFF
(4) Touch .
(5) Touch .
IMPORTANT
• While the AUX mode is activated, actions
such as turning off the audio player or
pulling out the connection cord may cause
noise spikes that can damage the system
speakers. Be sure to avoid this possibility by
turning off system power or switching from
the AUX mode to another mode before
shutting off or disconnecting the portable
audio player.
• Audio output levels will differ for the various
devices that can be connected using the
AUX input. Carefully adjust the volume until
the output level of the connected player is
known.
• Before using a portable audio player inside a
vehicle, read the player's operation manual
carefully and confirm that you will be able to
easily operate the device in the vehicle
before proceeding.
SRC button
Enable AUX
Next
Done
To Next Page
Loading...
Need help?
General
