Sullair EC2000 User Manual

2: Operation EC2000 Controller Operation Manual
8 88290022-798 R03
• Unload P:—unload pressure
• Load P:—load pressure
• FanStart:—fan start temperature
• Fan Stop:—fan stop temperature
• Auto Stop:—idle stop time
• Baudrate;—baud rate of communication
• Unit No.:—number of compressor in combined
mode
• CommMode:—communication mode
• Seq. Start:—sequence starting time
• Seq. Uload:—sequence unloading time
• Seq Turns:—sequence rotation time
• HW Ver:—hardware version
• SW Ver:—software version
• Update:—date of last update
• Tel:—not used
An up arrow indicates there are more parameters before
the current pair. A down arrow indicates there are more
parameters after the current pair.
• You can view the previous pair of parameters
by pressing the Up button.
• You can view the next pair of parameters by
pressing the Down button.
To return to the main menu, press the Return button.
2.3.3 Compressor Maintenance screen
To access the Compressor Maintenance screen, at the
main menu select Svc and press the Shift/Enter button.
The Compressor Maintenance screen displays used and
remaining service life for common maintenance items.
• AirF Use:—air filter used time
• AirF Rmn:—air filter remaining time
• OilF Use:—oil filter used time
• OilF Rmn:—oil filter remaining time
• Sep Use:—oil/air separator used time
• Sep Rmn:—oil/air separator remaining time
• Lube Used:—fluid used time
• Lube Rmn:—fluid remaining time
• GreaseUsed:—grease used time
• Grease Rmn:—grease remaining time
An up arrow indicates there are more parameters before
the current pair. A down arrow indicates there are more
parameters after the current pair.
• You can view the previous pair of parameters
by pressing the Up button.
• You can view the next pair of parameters by
pressing the Down button.
To return to the main menu, press the Return button.

Sullair EC2000 Specifications

General

Brand	Sullair
Model	EC2000
Category	Controller
Language	English