Section 7
ILLUSTRATIONS AND PARTS LIST
62
7.11 COMPRESSOR COOLING AND LUBRICATION SYSTEM (WATER---COOLED, LS---12 SERIES 60HP,
AND LS---16 SERIES 60---75HP) (CONTINUED)
key part
number description number quantity
29 bracket, air connector and condenser drain 250017---233 1
30 nipple, pipe 3/4” x 2 1/2” 822112---025 1
31 coupling, pipe 3/4” 801215---030 1
32 bushing, reducing 3/4” x 1/2” 802103---200 2
33 connector, tube straight
1/2” mnpt x 3/8” t reducing 250024---692 1
34 tubing, thermoplastic 3/8”od 250024---746 1 ft.
35 connector, tube---el 1/2” mnpt x 3/8” t 813706---375 1
36 support, moisture separator and trap 250018---160 1
37 capscrew, 1/2” x 1 1/2” gr5 828608---150 8
38 washer, springlock regular 1/2” 837508---125 8
39 aftercooler 040680 1
40 nipple, pipe 1 1/2” x 21/2” 822124---025 3
41 washer, regular 3/8” 838206---071 22
42 capscrew, hex head 3/8”---16 x 1 1/4” 828606---125 16
43 bushing, reducing hex 1” x 3/4” 802104---030 4
44 nipple, pipe 3/4” x 6” 822112---060 1
45 connector, tube---m 3/4” 810212---075 2
46 tube, 3/4” 250018---408 1
47 washer, springlock regular 3/8” 837506---094 16
48 nut, hex 3/8”---16 825006---337 16
49 bushing, reducing hex 1 1/2” x 1” 802106---040 1
50 tee, reducing 1 1/2” x 1 1/4” x 1” 802206---054 1
51 valve, thermal
(IV)
014512 1
52 union, pipe 1 1/2” 802515---060 1
53 elbow, pipe 3/4” 801515---030 3
54 bushing, reducing 3/8” x 1/4” 807601---010 1
55 cooler, fluid 041015 1
56 clamp, 5” 043364 1
57 support, starter box --- right hand 250017---977 1
58 nipple, pipe xs 1 1/4” x close 822220---000 1
59 elbow, reducing 1 1/2” x 1 1/4” 801606---050 1
60 connector, tube---m 1” x 1” 810216---100 1
61 tube, 1” 250018---399 1
62 support, starter box --- left hand 250017---978 1
63 tube, 3/4” 250018---404 1
(Continued on page 65)
(IV)
For maintenance on thermal valve no. 014512, order repair kit no. 001168.
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF COMPRESSOR.
To Next Page
Loading...
