INSTRUMENTS & CONTROLS
30-14
For comfortable driving, adjust the height of the operator seat
with adjustment bolt (A) and knobs (B1 and B2) provided at
rear lower side of operator seat.
Operator Seat Height Adjustment
Seat Height Adjustment :
Ÿ Loosen the bolt (A) from rear side knobs (B1 and B2) of
operator seat.
Ÿ Remove the cap (D) from both sides knobs (B1 and B2).
Ÿ Loosen the nut (C) from both side knobs (B1 and B2).
Ÿ Loosen the knobs (B1 and B2) and set the operator seat
height as per requirement then further re-tighten by
rotating the knobs clock wise and counter clock-wise.
Ÿ Again tighten the bolt (A) from rear side.
B2
B1
C
A
D
To Next Page
Loading...
