GDM-FW9010(E) 4
POWER SAVING FUNCTION
This monitor meets the power-saving guidelines set by VESA,
E
NERGY
S
TAR, and NUTEK. If the monitor is connected to a
computer or video graphics board that is DPMS (Display Power
Management Signaling) compliant, the monitor will automatically
reduce power consumption in three stages as shown below
.
* Figures reflect power consumption when no USB compatible
peripherals are connected to the monitor.
** “Sleep” and “deep sleep” are power saving modes defined by the
Environmental Protection Agency.
*** When your computer enters power saving mode, the input signal is
cut and NO INPUT SIGNAL appears on the screen before the
monitor enters active off mode. After a few seconds, the monitor
enters power saving mode.
Power mode Power
consumption*
! (power)
indicator
normal
operation
≤ 170 W green
1 standby ≤ 15 W green and orange
alternate
2 suspend
(sleep)**
≤ 15 W green and orange
alternate
3 active off***
(deep sleep)**
≤ 1 W orange
power off 0 W off
To Next Page
Loading...
Need help?
General
