User’s Manual - 13
Copyright(c) 2005, Sun Microsystems, Inc. All rights reserved.
On-Screen Display
OSD How to adjust
Adjust the pincushion setting when the sides of the
display are bowed in or bowed out; adjust the trapezoid
setting when the top or bottom of the display is too large
or small.
1. Push the Menu button.
2. Push the button or until the Geometry screen is
displayed.
3. Push the button or button to select Pincushion/
Trapezoid.
4. Push the Menu button to open the Pincushion/Trapezoid
adjustment screen.
5. Use the button or button to adjust the pincushion
setting; use the button or button to adjust the trapezoid
setting.
Adjust the pinbalance setting when the sides of the
display are bowed towards the left or right.
1. Push the Menu button.
2. Push the button or until the Geometry screen is
displayed.
3. Push the button or button to select Pinbalance.
4. Push the Menu button to open the Pinbalance adjustment
screen.
5. Use the button or button to adjust the Pinbalance
setting.
Pincushion/Trapezoid
Pinbalance
To Next Page
Loading...
