SUNFAR E300 SERIES
2. Safety Regulations
There are four kinds of symbols being related with cautions as following:
Danger: If user does not operate according to requirements, it will lead
to death, grievous bodily harm or severe property loss.
Warning: If user does not operate according to requirements, it will lead
to inverter injury or damage.
This s
mbol will offer some useful information.
This s
mbol will offer some items that need to be noticed in o
eration.
2.1 Installing
2.1.1. Do not install inverter on combustible material.
2.1.2. Do not install in explosive ambient.
2.1.3. Do not drop other material into inverter.
It is forbidden to disassemble and refit inverter.
2.2 Wiring
2.1.4. It must be operated by professional worker when wiring.
2.1.5. Please be sure to turn off the power supply at least 10 min before wiring.
2.1.6. Inverter and motor must be grounded correctly.
2.1.7. Be sure to wire and inspect after power-off at least10 minutes.
2.1.8. Electron components are sensitive about static electricity, so do not drop other
material into inverter or touch the main circuit.
It is forbidden to connect AC power supply with the U, V and W
output terminals directly.
E300 Series Mini-type Integrated Universal Inverter Manual
To Next Page
Loading...
Need help?
General
