Sungrow Logger3000 User Manual

15
5.4 Storage
If the Logger3000 is not to be installed immediately after receiving, observe the
following requirements to store it properly:
• The Logger3000 should be store in its original packing case and placed in a well-
ventilated, dry, and tidy room.
• The storage carrier should be suitable for the weight of the Logger3000.
• The storage environment should be well ventilated, dry, and without any
accumulated water.
• Ambient temperature: -40℃ to +85℃; relative humidity: 0~95%, no condensation.
• Take precautions to protect the device against damage due to harsh environment
such as shock cooling, shock heating, and collision.
• Regularly inspect the Logger3000, usually at least once a week. Check the packing
case for intactness and replace it immediately when necessary.
• Unpack and check the Logger3000 in powered on state if it has been stored more
than half a year.
• The Logger3000 must be packed during storage!
• Never store the Logger3000 outdoors or in a place directly exposed to!
• No tilting or stacking!
After long-time storage, thoroughly check the Logger3000 and ensure it is
undamaged before installation. If necessary, install the Logger3000 only after
it has been tested by qualified personnel.
User Manual 5 Unpacking and Storage

Sungrow Logger3000 Specifications

General

Brand	Sungrow
Model	Logger3000
Category	Data Loggers
Language	English