Sungrow Logger3000 User Manual

19
step 4 Fasten the tapping screw with a screwdriver by the torque of 0.3N·m.
-- -- EEnndd
6.3.2 Rack-mounted Installation
Use 1U standard rack in case of the rack-mounted installation.
Installation tools and component parts
• 1U standard rack (beyond the scope of delivery)
• Electric screwdriver (beyond the scope of delivery)
• Screw (beyond the scope of delivery)
• Nut (beyond the scope of delivery)
IInnssttaallll mmoouunnttiinngg eeaarrss
Anchor the mounting ears to the Logger3000 with supplied M4x8 cross recessed
countersunk head screws. The fastening torque is 1.8-2.4N·m, and the anchoring
method is as follows:
step 1 Mark positions on the rack according to dimensions of the Logger3000.
step 2 Drill holes on the rack with a hammer drill of φ6mm.
User Manual 6 Mechanical Installation

Sungrow Logger3000 Specifications

General

Brand	Sungrow
Model	Logger3000
Category	Data Loggers
Language	English