Sungrow Logger3000 User Manual

49
CClloocckk
SSoouurrccee
DDeessccrriippttiioonnss
NTP When the clock source is set to "NTP", time of all devices can be
synchronized. Click the "Time zone" pull-down-list and select the local
time zone. Fill in the domain, set the time interval, and click "Save". In
this way, the time of the Logger3000 is synchronized with the time of
the server.
IEC104 In this way, the Logger3000 and the background must use the IEC104
communication protocol, and otherwise, this manner is invalid.
iSolarCloud
-
MODBUS-
TCP
-
GPS Select the corresponding country and city in the time zone drop-down
box, and click "Save".
It is recommended that the top priority should be given to the IEC104 and then the
iSolarCloud.
-- -- EEnndd
Set the system time when using the Logger3000 for the first time.
9.10.9 Forwarding Configuration
step 1 Click "System" -> "Transfer configuration" to enter the corresponding interface.
step 2 Click the button
to modify the forwarding configuration information of iSolarCloud.
-- -- EEnndd
The default iSolarCloud station is "Chinese Server". Users in mainland China
select "Chinese Server", users in Europe select "European Server", and users
in other regions select the "International Server".
9.10.10 IEC104
Configure the IEC104 forwarding service for the Logger3000 on this interface.
Click "System" -> "Transfer configuration" -> "IEC104" to enter the corresponding
interface.
SSeerrvveerr MMooddee
In the server mode, Logger3000 is used as a Server and connected to PC server to
implement data transmission and instruction delivery.
The local port is 2404.
User Manual 9 Web Interface

Sungrow Logger3000 Specifications

General

Brand	Sungrow
Model	Logger3000
Category	Data Loggers
Language	English