71
11 Maintenance
Due to the influence of ambient temperature, humidity, dust and vibration, the inner
components of the Logger3000 will be aging and worn out. To ensure the system safety
and maintain the efficiency of the Logger3000, it is necessary to carry out routine and
periodic maintenance.
All measures, which can help the Logger3000 to keep good working conditions, are
within the maintenance scope.
11.1 Safety Instructions
Only qualified personnel can perform the work described in this chapter.
Do not leave any screws, washers or other metallic parts inside the Logger3000
to avoid device damage.
After the Logger3000 stops, wait at least 5 minutes before performing any work
on it.
FFiivvee SSaaffeettyy RRuulleess
Respect the following five rules throughout the maintenance or service process to
ensure personnel safety.
• Disconnect the Logger3000 from all the external connections and internal power
supplies.
• Ensure that the Logger3000 will not be inadvertently connected.
• Ensure that the Logger3000 is voltage free with a multimeter.
• Connect necessary grounding cables.
• Cover the electrical components with insulation cloth during operation.
To Next Page
Loading...
Need help?
General
