Sungrow Logger3000 - More; About

56
-- -- EEnndd
9.10.14 More
step 1 Click "System" -> "Port Parameters" -> "More" to enter the interface.
step 2 Select automatic online state (enable/disable) from the drop-down list.
• When the state is set to "Enable", parameters of string inverters researched and
developed by SUNGROW can be automatically added without additional operations
on the Web.
• When the state is set to "Disable", automatic parameter adding is not supported.
-- -- EEnndd
9.10.15 About
Click "About" to enter the corresponding interface.
Firmware information on Logger3000 can be accessed on this interface.
Scan QR code on the interface with the iSolarCloud App, to add new Logger3000.
9 Web Interface User Manual