TD_20210219_SG30-50-110CX Commissioning Guide_V1.1 Page 13 of 21
© SUNGROW AUSTRALIA GROUP PTY LTD All rights reserved.
As we continuously improving our products, changes to this document may occur without notice.
3.3 Scan for Inverters
Navigate to ‘Device’ and click ‘Device List’ section and click ‘Auto search’. Sungrow
inverters will be automatically detected as long as they are correctly connected and
energized.
Confirm the communication status for each device under Communication status
section. Green icon indicates the connection works and red icon means no connection
between Logger1000/ EyeM4 and the device.
To Next Page
Loading...
Need help?
General